CIVIL ENGINEERING==>>Advantages of RCC

Reinforced Cement Concrete : Advantages of RCC

RCC (Reinforced Cement Concrete)

RCC (Reinforced Cement Concrete) is the combination of using steel and concrete instead of using only concrete to offset some limitations. Concrete is weak in tensile stress with compared to its compressive stress. To offset this limitation, steel reinforcement is used in the concrete at the place where the section is subjected to tensile stress. Steel is very strong in tensile stress. The reinforcement is usually round in shape with approximate surface deformation is placed in the form in advance of the concrete. When the reinforcement is surrounded by the hardened concrete mass, it form an integral part of the member. The resultant combination of two materials are known as reinforced concrete. In this case the cross-sectional area of the beam or other flexural member is greatly reduced.

Advantages of RCC

Nowadays, RCC is used in most of the structures. The advantages of RCC (Reinforced Cement Concrete) are as following.

Reinforced Cement Concrete has good compressive stress (because of concrete).
RCC also has high tensile stress (because of steel).
It has good resistance to damage by fire and weathering (because of concrete).
RCC protects steel bars from buckling and twisting at the high temperature.
RCC prevents steel from rusting.
Reinforced Concrete is durable.
The monolithic character of reinforced concrete gives it more rigidity.
Maintenance cost of RCC is practically nil.

It is possible to produce steel whose yield strength is 3 to 4 time more that of ordinary reinforced steel and to produce concrete 4 to 5 time more stronger in compression than the ordinary concrete. This may high strength material offer many advantages including smaller member cross-sections, reduce dead load and longer spans. But the high stress result in high strain and consequently large deflection of such member will occur under ordinary loading conditions. Also high strength reinforcing steel would include large crack in the concrete which reduce the durability of the structure. The commonly used yield strength of high strength reinforcing steel is 60 ksi.

Comments

civil engineering-->> overview of arches

Arches An arch is an opening spanned by a collection of wedge shaped pieces ( voussoirs ) which stay in position by pressing in on one another. The joints between the pieces appear to radiate from some central point lying within the opening, and sometimes from points which lie outside, so every type of arch has a characteristic curvature. The simplest and visually most natural shape for an arch is the semicircle but many other designs have been used. How an Arch "Works" The central voussoir ( keystone ) is traditionally the last to be set into position to "lock" the whole thing into a strong and stable structure. A keystone is not always necessary, however; there may be a joint at the apex instead, as is common in Gothic arches. Gravity tries to pull the keystone downwards, but the thrust is carried on either side by the voussoirs immediately flanking it. These in turn have their total thrust carried through the whole semicircle of pieces in a sideways direc...

civil engineering-->>Determinacy, Indeterminacy and Stability of Frames

Determinacy, Indeterminacy and Stability of Frames : Structural engineers must be able to apply judgment rather than stated rules. The most important aspect of structural design is not the ability to apply formulas or manipulate mathematics. The most important skill for the structural engineer is to be able to stand back, look at a drawing or sketch and determine whether a structure is stable, and if it is stable, to be able to determine how it will carry the applied loads. For a very complicated structure this might be more difficult and a computer can provide some help, but ultimately it is the skill and concern of a good structural engineer which produces good structural designs which have integrity. Another important closely related skill is the ability to determine whether, and to what degree, a structure is statically indeterminate. There really aren’t many rules and rules may be difficult to apply in any case. For this reason, we need experience. A skilled structural...

civil engineering-->>Types of arches

Types of arches With reference to the earlier post on arches, this one defines the various types of arches. Arches are constructed in four basic shapes that frame and support doors, windows, porches, and other wall openings: Flat arch Triangular arch Round arch Pointed arch Flat arch An arch having a horizontal intrados with voissoirs radiating from a centre below, often built with a slight camber to allow settling is called a flat or jack arch. French arch: A flat arch with voissoirs inclined to the same angle at each side of the center. The mortar joints do not, therefore, radiate to a common centre. Not, technically, a proper arch, and of weak form. Triangular arch It is a primitive form of arch consisting of two stones laid diagonally to support each other over an opening. Hence, the span is limited by the size of the available material. Corbel arch: A false arch formed by corbelling courses fro...

CE

Search This Blog