Skip to main content

civil engineering-->>Concrete Slab - Definition, Functions & Design of Slab

Concrete Slab - Definition, Functions & Design of Slab

Definition

A flat piece of concrete, put on the walls or columns of a structure. It serves as a walking surface but may also serve as a load bearing member, as in slab homes.

Functions of Concrete

  1. Provide a flat surface
  2. To support load
  3. Sound, heat and fire insulator
  4. Act as a divider (privacy) for the occupants
  5. Upper slab became the ceiling for the storey below
  6. Space between slab and ceiling can be used to place building facilities

Design Considerations in Slab:
  1. Locate position of wall to maximize the structural stiffness for lateral loads
  2. Facilitates the rigidity to be located to the center of building
  3. Its necessary to check the slab deflection for all load cases both for short and long term basis. In general, under full service load, Deflection (δ) < L/250 or 40 mm whichever is smaller.
  4. Its preferable to perform crack width calculations based on spacing of reinforcement.
  5. Good detailing of reinforcement will
  6. Restrict the crack width to within acceptable tolerances as specified in the codes and
  7. Reduce future maintenance cost of the building
  8. Take care of punching shear i.e use more steel or thickness of concrete where there is chance of punching shear in theconcrete slab. To increase shear capacity at the edges of walls and columns embed shear studs or stirrup cages in the slab.
  9. Check for lateral stability
Methods of Design of Slab
  1. The finite element analysis
  2. The simplified method
  3. The equivalent frame method

Comments

Post a Comment

Popular posts from this blog

civil engineering-->> overview of arches

Arches An arch is an opening spanned by a collection of wedge shaped pieces ( voussoirs ) which stay in position by pressing in on one another. The joints between the pieces appear to radiate from some central point lying within the opening, and sometimes from points which lie outside, so every type of arch has a characteristic curvature. The simplest and visually most natural shape for an arch is the semicircle but many other designs have been used. How an Arch "Works" The central voussoir ( keystone ) is traditionally the last to be set into position to "lock" the whole thing into a strong and stable structure. A keystone is not always necessary, however; there may be a joint at the apex instead, as is common in Gothic arches.  Gravity tries to pull the keystone downwards, but the thrust is carried on either side by the voussoirs immediately flanking it. These in turn have their total thrust carried through the whole semicircle of pieces in a sideways direc...
Post a Comment
Read more

civil engineering-->>Determinacy, Indeterminacy and Stability of Frames

Determinacy, Indeterminacy and Stability of Frames : Structural engineers must be able to apply judgment rather than stated rules. The most important aspect of structural design is not the ability to apply formulas or manipulate mathematics. The most important skill for the structural engineer is to be able to stand back, look at a drawing or sketch and determine whether a structure is stable, and if it is stable, to be able to determine how it will carry the applied loads. For a very complicated structure this might be more difficult and a computer can provide some help, but ultimately it is the skill and concern of a good structural engineer which produces good structural designs which have integrity. Another important closely related skill is the ability to determine whether, and to what degree, a structure is statically indeterminate. There really aren’t  many rules and rules may be difficult to apply in any case. For this reason, we need experience. A skilled structural...
1 comment
Read more

civil engineering-->> truss types

                                                                                                                           Modified-Queen-Scissors                                                          Baby Barn and Shed Trusses                                                                        floor truss       ...
1 comment
Read more