Skip to main content

civil engineering-->>Metals used in Civil Engineering

Metals used in Civil Engineering

All metals used for engineering works are classified into
  1. Ferrous metals
  2. Non-Ferrous metals: Wherein iron is not the main constituent (Copper, Aluminum, Zinc and lead etc)

A) Ferrous metals:

Wherein iron is the main constituent (Cast iron, wrought iron and different forms of steels)
Ferrous metals ► not directly obtained from iron ores

A-1) PIG IRON:

From iron ore ► impure form of metal ► Pig iron
It is the pig iron which further yields “Ferrous metals”
Pig iron is not suitable for any mechanical use unless it is converted into cast iron, wrought iron or steel

A-2) CAST IRON:

Pig iron ► re melted with limestone and coke and poured into moulds of desired shapes and sizes to get purer product known as cast iron
Carbon content in cast iron varies from 2 to 5%
During re melting of pig iron ► scrap iron may also be added for economy

Properties of Cast Iron

  1. It is brittle, non ductile, non malleable and cracks when subjected to shocks
  2. It cannot be magnetized
  3. It does not rust
  4. It is strong in compression but weak in tension and shear
  5. Its melting point is 12000C
  6. Its specific gravity is 7.5

USES

Weak in tension therefore cannot be used in construction
Can be used for parts of pumps, motors, engines etc
Because of corrosion resistance ►can be used for pipes to some extent
A-3) WROUGHT IRON
When pig iron is melted in such a way as to remove all of the carbon and other impurities, the result is wrought iron
Good quality wrought iron contains 99.5 % iron, less than 0.1 % of Silicon, 0.01 % of Sulfur, 0.07 % of phosphorus and 0.03 % of manganese

Properties of Wrought Iron

  1. Wrought iron is very malleable and ductile
  2. Its tensile strength is 20-26 tons /in2
  3. It is strong in compression but not so strong as steel
  4. It can be easily worked, welded and is tough
  5. Its melting point is 28000F
  6. Wrought iron became pasty and very plastic at red heat and could be easily forged at about 16500F
USES:
Since mild steel has replaced the wrought iron, therefore it is no longer produced in large extent. Still in use for roof sheets, wires and metal ornaments etc

A-4) STEEL

Steel is an alloy of iron and carbon. Pure iron’s strength remarkably increases when alloyed with carbon. The tensile strength increases with increasing carbon content but the ductility reduces. Steel having its properties because of the presence of carbon alone is called “Plain carbon steel”

PLAIN CARBON STEEL can further be classified as
  1. Low carbon steel or mild steel:
The carbon content does not increases 0.25%
Soft and ductile ► mostly used for construction purpose
Uses ► Sheets, rods, wires, pipes, hammers, chains, shafts etc
  1. Medium-carbon steel :
The carbon content is 0.25 to 0.5 %
Stronger than the mild steel slightly less ductile
Uses ► Shafts, connecting rods and rails etc
  1. High- carbon steel :
Carbon content is above 0.5%
Harder and stronger than mild steel and medium carbon steel
Uses ► Keys, knifes, drills etc

Properties of Mild Steel

  1. Ductile and malleable
  2. It corrodes quickly
  3. It can be permanently magnetized
  4. It is tough and more elastic than cast iron and wrought iron and withstands shocks and impacts well
  5. It is equally strong in tension, compression and shear
  6. Its specific gravity is 7.8
  7. It is not much affected by Saline water

Properties of High-carbon Steel

  1. Its structure is granular
  2. It is more tough and elastic than mild steel
  3. It is easier to harden and then to weld
  4. It is more difficult to forge and then to weld
  5. It can be permanently magnetized
  6. Comparatively it is stronger in compression than in tension or in shear
  7. It withstands vibration and shocks better

MANUFACTURE OF STEEL

Three basic raw materials are needed in large quantities for the production of steel
  1. Iron Ore
  2. Coal
  3. Lime stone
The first step in the steel manufacture begins at the blast furnace. To separate iron from iron ore ► coke (substance when gas is taken out of coal), limestone and dolomite are charged into the blast furnace
Temperature raised to 1600oF. This high temp causes the coke to burn and melt the iron. This red hot iron drained at an opening at the base of the furnace. Natural gas is often injected to reduce the amount of coke consumed. The dolomite and limestone combine with the non-ferrous elements of the ore to form a slag, which floats on the top of the molten iron and is removed separately. The product of the blast furnace is known as “Pig Iron” the basic ingredient of steel
It takes 2 tons of iron ore, 2/3 ton of coke, ½ ton of limestone, 4 tons of air to make 1 ton of Pig iron. Some of the pig iron goes to the foundries to make iron castings, but the vast majority is re melted and used in the production of steel in steel furnace. Several types offurnaces are used for the production of steel including
  • Open Hearth Furnace
  • Bessemer Furnace
  • Electric Furnace
  • New Oxygen Furnace

Comments

Post a Comment

Popular posts from this blog

civil engineering-->> overview of arches

Arches An arch is an opening spanned by a collection of wedge shaped pieces ( voussoirs ) which stay in position by pressing in on one another. The joints between the pieces appear to radiate from some central point lying within the opening, and sometimes from points which lie outside, so every type of arch has a characteristic curvature. The simplest and visually most natural shape for an arch is the semicircle but many other designs have been used. How an Arch "Works" The central voussoir ( keystone ) is traditionally the last to be set into position to "lock" the whole thing into a strong and stable structure. A keystone is not always necessary, however; there may be a joint at the apex instead, as is common in Gothic arches.  Gravity tries to pull the keystone downwards, but the thrust is carried on either side by the voussoirs immediately flanking it. These in turn have their total thrust carried through the whole semicircle of pieces in a sideways direc...
Post a Comment
Read more

civil engineering-->>Types of arches

Types of arches With reference to the earlier post on arches, this one defines the various types of arches. Arches are constructed in four basic shapes that frame and support doors, windows, porches, and other wall openings: Flat arch Triangular arch Round arch Pointed arch Flat arch An arch having a horizontal intrados with voissoirs radiating from a centre below, often built with a slight camber to allow settling is called a flat or jack arch. French arch:  A flat arch with voissoirs inclined to the same angle at each side of the center. The mortar joints do not, therefore, radiate to a common centre. Not, technically, a proper arch, and of weak form. Triangular arch It is a primitive form of arch consisting of two stones laid diagonally to support each other over an opening. Hence, the span is limited by the size of the available material. Corbel arch:  A false arch formed by corbelling courses fro...
Post a Comment
Read more

civil engineering-->>Determinacy, Indeterminacy and Stability of Frames

Determinacy, Indeterminacy and Stability of Frames : Structural engineers must be able to apply judgment rather than stated rules. The most important aspect of structural design is not the ability to apply formulas or manipulate mathematics. The most important skill for the structural engineer is to be able to stand back, look at a drawing or sketch and determine whether a structure is stable, and if it is stable, to be able to determine how it will carry the applied loads. For a very complicated structure this might be more difficult and a computer can provide some help, but ultimately it is the skill and concern of a good structural engineer which produces good structural designs which have integrity. Another important closely related skill is the ability to determine whether, and to what degree, a structure is statically indeterminate. There really aren’t  many rules and rules may be difficult to apply in any case. For this reason, we need experience. A skilled structural...
1 comment
Read more